Knowledgebase : Piston Filler Machines
   
The amount of product to dispense is set by a simple adjustment of the length of the piston stroke (the distance covered by the piston). The adjustment is performed by turning an small adjusting wheel located on the side of the machine. If the stroke leng...
If you purchased a high density piston filler machine, then, it will need the hopper in order to dispense the precise amount every time. Gravity helps this machine to dispense the high density product in your containers. There is a rotary valve which sele...
The cycle speed can be adjusted by adjusting the small black knobs on top of the main piston housing. Adjusting one may require an adjustment to the other one to achieve and maintain a smooth cycle flow. This is adjusted according to the size of the conta...
The compressor must have a minimum tank size of 25 GALLONS and be able to deliver 4 CFM (CUBIC FEET OF AIR PER MINUTE) AT 90 PSI (PRESSURE PER SQUARE INCH). Please note just because a compressor can reach 150 psi does not mean it can maintain that pressur...
The size for the compressors hose connector is 1/4". So you will be looking for a fitment of 1/4".